Friday, September 10, 2010     | Register
Welcome to the Support Forums

In order to post to the support forums, you must be logged in as a registered user.


These forums are not moderated and may not be checked for a few days, so any important support issues should be emailed directly to support at orizonti.com for the fastest response.
Orizonti Forums
Forums > Orizonti DNN Module Support > Newsletter
Subject: Cannot build the source code

You are not authorized to post a reply.   
Author Messages
thtang
Posts:8
12/02/2006 1:52 AM Alert 
I have the following error when try to build the source code.

Error 1 Could not load type 'Orizonti.Newsletter.editUsers'. C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\editUsers.ascx

Error 2 Could not load file or assembly 'FreeTextBox' or one of its dependencies. 。 C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\sendNewsletter.ascx

Error 3 The file '/Orizonti.Newsletter-1.2/controls/TextEditor.ascx' does not exist. C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\sendNewsletter.ascx

Error 4 Could not load type 'Orizonti.Newsletter.sendNewsletter'. C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\sendNewsletter.ascx

Error 5 Unknown server tag 'dnn:TextEditor'. C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\sendNewsletter.ascx

Error 6 Could not load type 'Orizonti.Newsletter.editNewsletter'. C:\Documents and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\editNewsletter.ascx

Could you advice me how to solve it, Thank you.

Error 7 Could not load type 'Orizonti.Newsletter.viewNewsletter'. C:\Docutments and Settings\George\Desktop\Orizonti.Newsletter-1.2\Source\viewNewsletter.ascx
rstieb
Posts:709
12/02/2006 9:04 PM Alert 
Not sure how you have your setup, but here's how I have my development environment setup...

VS 2003
Create a blank solution.
Add DotNetNuke project to solution
Add the Newsletter project to the solution. Make sure the Newsletter module was extracted to the desktopmodules folder.
Add the Newsletter SqlDataProvider project to the solution...

That should be it...
thtang
Posts:8
12/02/2006 10:00 PM Alert 
I can import the module in the dnn. However, I try to build the source code but i see the errors as mentioned. I would like to know what i shall do to build it successfully.

Thank you.
rstieb
Posts:709
12/03/2006 8:47 AM Alert 
Do you have the setup the same as I described? Looking at the errors described above in your first post, the module projects are not under the DNN/DesktopModules folder. Also, what version of Visual Studio are you using?
thtang
Posts:8
12/03/2006 10:05 AM Alert 
I followed your instructions and error 1 4 6 7 are still there. I am using Visual Web Developer 2005 Express Edition.

Also, i don't know how to add Newsletter SqlDataProvider into the project, as we are using developer express. Would you please advice?

Thank you
thtang
Posts:8
12/03/2006 12:45 PM Alert 
By the way, I don't really understand the meaning of 'Add the Newsletter project to the solution'. Is it meaning that i need to drag the whole folder of orizonti.newsletter to the desktopmodules.

Please advice. I am really new to dnn.

Thank you
rstieb
Posts:709
12/03/2006 7:15 PM Alert 
The project was built and compiled with Visual Studio 2003. You'll need to upgrade the project to make it work with any version of Visual Studio 2005.
thtang
Posts:8
12/04/2006 3:06 AM Alert 
I think the version is ok.
I am concerning the installation process. I just put the source folder to the desktopmodules folders and build.. this may be problematic.

I would like to know more your suggested process. Would you mind telling us more about
"Add the Newsletter project to the solution." and
"Add the Newsletter SqlDataProvider project to the solution"
?

I am also wondering how the .dnn is made as i saw from the patch that there is a .dnn file.

Thank you.
rstieb
Posts:709
12/04/2006 2:23 PM Alert 
In Visual Studio 2003, each project has to be added to the solution... In VS2005, this is not the case with web projects... I was referencing VS 2003.

The DNN file can be created by going to Host-Module Definitions and Clicking the pencil next to your module and clicking the Create Private Assembly link on the bottom of the page... It creates a zip file including the DNN file for installing the module...
You are not authorized to post a reply.
Forums > Orizonti DNN Module Support > Newsletter > Cannot build the source code


ActiveForums 3.6
Copyright (c) 2010 Orizonti Group Inc.   |  Privacy Statement  |  Terms Of Use